Sig Sauer Repair Manual
Register your SIG SAUER firearm and find warranty details. Owners Manuals. Download owners manuals for your SIG SAUER pistols and rifles. Find answers to the most frequently-asked questions about our products and services. PRIOR TO USING THIS SIG SAUER FIREARM. Adjustment or repair, or lack of maintenance. Instructions in this manual is restricted to a certified SIG SAUER Armorer or Professional Gunsmith. Failure to comply with these restrictions will void your warranty. Sig p226 combat pistol armorer's manual [Loose Leaf Edition.]. NEW 60 page, student loose leaf facsimile edition. Re-Imaged from Original for Greater Clarity. UNBOUND BINDER-READY / LOOSE LEAF, BINDER-READY means that the pages are hole-punched and ready to be put in binders. PLEASE NOTE THE BINDER(S) ARE NOT INCLUDED. Replacing the air gun at SIG SAUER option); provided, however, that the air gun is returned unloaded and freight prepaid to SIG SAUER at 72 Pease Boulevard, Newington, NH 03801. Proof of purchase will be required with any request for warranty repair. Sig Sauer All Cal. Pistol Service Manual 53 Pg. $4.40 shipping. Sigarms SIG SAUER PISTOL PRO SP2022, SP2009, SP2340 Owner's Manual. Free shipping. 2 new & refurbished from $7.99 * EXCELLENT ORIGINAL * SIG SAUER P230 OWNER'S MANUAL 50 pages. FAST 'N FREE. Sig Sauer Mosquito Stainless Steel Guide Rod. Sig sauer p226 instructions for armorers manual. UNBOUND BINDER-READY / LOOSE LEAF, BINDER-READY means that the pages are hole-punched and ready to be put in binders. PLEASE NOTE THE BINDER(S) ARE NOT INCLUDED.
26
USA
27
USA
Sig Sauer Parts and Shooting Accessories. GunWurkz is an Sig Sauer Master Dealer! We are the largest Sig Sauer Dealer in the San Antonio Area. We offer a huge variety Sig Sauer gun and rifle parts and accessories.
Hinweis
10 Pistol Service and Repairs
10.1 Cause and correction of malfunctions
Malfunctions can be prevented with the proper mainte-
nance of the pistol (cleaning and inspection). Should,
however, a malfunction occur while firing, proceed as
follows:
•
Hold the pistol pointed in the firing direction
(safe direction) and take your finger from the trigger
while you carry out the steps described below.
1. Remove magazine and deposit safely.
2. Draw slide 50 back until stop and arrest it in the open
Sig Sauer P228 For Sale
position by pushing up the slide catch lever 26.
3. Check (visually and manually with appropriate aid) to
ensure that there is no round, bullet, case or foreign
matter in the chamber or in the barrel (see section 3,
page USA 10). If a blockage is lodged in the barrel
bore, strip the pistol (see section 8.1) and have the
blockage removed by a qualified gunsmith using the
proper tools.
4. Remove all rounds, cases or foreign matter. Clean,
lubricate and assemble the pistol (see section 8.3/8.4).
5. Have pistol checked by a gunsmith or armor.
Warning
Service, Repairs and Warranty
Service, Repairs and Warranty
Hinweis
Assembly/Malfunction
Ammunition feed:
No round chambered.
Siemens OpenStage Manager V4. Administrationsprogramm f. CallBridge Collection. Machen Sie einen Download der passenden CallBridge Collection. Download 'optipoint 500 systemspezifische Telefone. Siemens AG 2003 Information and Communication Networks. HiPath CallBridge Collection V2. The Avaya Proactive Contact Documentation Library is a. 
Jan 03, 2010 KG is a Trademark Licensee of Siemens AG. CallBridge Collection: IP. Communication for the open minded Siemens. Die Siemens Systemtelefone optiPoint 500/600 bieten diese komfortable PC-Kommunikationsm. Center Entry ist CallBridge TU in der Auspr 22.6.1 Garbage Collection Automatic Action. Download 'CTI ESTOS ProCall One. Callbridge Collection Siemens Download Logo Design. The Wiki of Unify contains information on clients and devices. KG is a Trademark Licensee of Siemens AG. CallBridge Collection: IP. Welche Systemtelefone von Siemens und. Microsoft und das Office-Logo sind entweder Marken oder. Andreas Marschall’s TAPI and TSPI FAQ.
Slide:
Slide does not close properly.
Possible Cause
Magazine is not inserted correctly,
deformed or dirty.
Pistol or rounds dirty or lubricated
too much.
Pistol defective.
Possible Remedy
Insert magazine correctly or
replace it.
Strip, clean and lubricate pistol (see
sections 8.1 – 8.4), clean or replace
ammunition.
Repair by manufacturer.
Case ejection:
Empty case remains in the chamber
or gets stuck in ejector port.
Misfire:
Hammer strikes but no discharge.
Recoil insufficient because of fouling
with dirt.
Underloaded ammunition.
Pistol defective.
Firing pin sticks in the firing pin
guide.
Defective ammunition.
Pistol defective.
Strip, clean and lubricate the pistol
(see sections 8.1 – 8.4).
Replace ammunition.
Repair by manufacturer.
Strip, clean and lubricate the pistol
(see sections 8.1 – 8.4).
Have pistol checked by armor.
Manually cycle slide to chamber a
new round.
Repair by manufacturer.
Page 22: Care of the pistol, Service and repairs, Maintenance servicing
Maintenance
Servicing
21
US
06.01
9.5
Care of the pistol
10
Service and repairs
10.1 Fault detection, fault removal
Faults can be prevented with the proper
maintenance of the pistol (cleaning and
inspection). Should, however, a malfunction occur
while firing, proceed as follows:
1. Remove the magazine.
2. Retract the slide fully and lock to the rear
(open) using the slide catch lever.
3. Check (visually and manually with appropriate
aid) to ensure there is no round, bullet, case or
foreign bodies in the chamber or in the barrel
bore. If a bullet is lodged in the barrel bore,
strip the pistol and have the bullet removed by
a qualified gunsmith using the proper tools.
4. Remove all ammunition & foreign matter.
Clean, lubricate and assemble pistol.
5. Have pistol checked by a gunsmith or armorer.
CAUTION!
Neglecting the pistol
Possibly damage to the pistol and bodily
harm
•
Always keep your pistol clean and in good
working order.
•
Clean the pistol after 250 rounds, before
every ammunition type change and after
every use. The chamber in particular must be
thoroughly cleaned.
•
Never change or repair parts of your pistol
yourself.
•
Have your pistol checked once a year by a
qualified gunsmith or armorer, as defects,
wear and tear, corrosion etc. may not always
be visible from the exterior.
•
For repair or service work, we recommend
that you return your pistol to SIG SAUER.
•
If you order replacement parts without
returning the pistol, you are responsible for
ordering the correct replacement part and its
installation by a qualified gunsmith or
armorer.
SIG SAUER cannot be held liable for pistol
faults or malfunctions if the pistol has been
modified or parts have been installed or
repaired by third parties.
WARNING!
Uncontrolled shot discharge
Possibly death or serious injuries
•
Keep the pistol pointed in a safe firing
direction and remove your finger from the
trigger while you carry out the steps shown
below.